FAQ

Upgrade SHIFT

Upgrade SHIFT

The power LED keeps blinking when the power is turned on after the update.

This means that the update is incomplete and is still being processed. Within a few seconds, all LEDs will turn-off to indicate normal operation. If the LED continues to blink or the symptom recurs, please contact the nearest service center or our Customer Service Team.

Upgrade SHIFT

I accidentally removed the battery while the update was in progress.

Please check to see if the update file remains in the Micro SD card and try the update process again. If the problem persists, please contact the nearest service center or our Customer Service Team.

Upgrade SHIFT

All LEDs turn off immediately after the update begins

If the firmware version to be updated is the same or lower than the drone's firmware version, the update will terminate immediately. You can check the firmware version by the name of the firmware file: โ€œsfd1_fwup_image_ (version) .tsp.Use the app to check the current firmware and compare it with the firmware version you wish to update to.

Upgrade SHIFT

How do I update the drone’s firmware?

To update your droneโ€™s FW, please check firmware files on the SUPPORT > DOWNLOAD page.

Upgrade SHIFT

How do I update the controller’s firmware?

To update your controllerโ€™s FW, please check firmware files on the SUPPORT > DOWNLOAD page. โ€ป You need to use our proprietary FW updater. Download the updater on the SUPPORT > DOWNLOAD page.